PurePro Products

The contractors’ choice

 
 

BURNER TESTING


 

Cad Cell Relay & Eye Tester - Part #T70W

T70W  

Test both cad cell primary control and flame detector eye simultaneously without removing components from the burner. Built-in flame simulators for all popular controls insure accurate diagnosis and testing.

  • Test primary control and eye right on the burner
  • Simple, easy-to-read and understand ohmmeter
  • Built-in flame simulators for all popular controls
  • “Service Truck Tough” with high impact case

“Amp-Master” Thermostat Circuit Meter - Part #T80W

T80W  

Precisely measures thermostat control circuit current to allow correct setting of the heat anticipator. Avoids repeat service calls to remedy short cycling or override problems. Connects at either the thermostat or relay.

  • Accurately measures thermostat control circuit draw to correctly adjust heat anticipator setting
  • Meter dial matches T87F heat anticipator scale
  • “Service Truck Tough” with high impact case

”Easy Access” Pressure Tester - Part #T90W

For leak testing tankless coils and pressure testing new piping
0 – 100 PSI Pressure Gauge — All Brass Construction

T90W  

The ideal tester for checking tankless coils for leaks, and pressure testing new piping of all types prior to building code inspections. Easily connects to any convenient garden hose thread (ie. boiler drain valve, wash tub faucet, etc.) without disturbing any fittings in the system. Builtin Schrader valve allows system pressurization with just a simple bicycle pump. Comes in a rugged, “Service Truck Tough” high impact case.

T90-Drawing

“Pressure-View” Oil Burner Pump Tester - Part #T10W

T10W  

Precisely sets pump pressure and checks cut-off with accuracy not possible using non-liquid filled gauges. Gauge liquid dampens pulsation allowing precise measurement and cut-off test with just the turn of the knob – no disconnecting! “Service Truck Tough” carrying case with complete instructions.

  • Quick-connect fittings require only finger tightening
  • Brass construction with color coded hoses
  • Fits popular 3/16” and 1/4” nozzle line fittings
  • Stainless steel liquid filled gauge, range 0 – 300 PSI
  • Easy-to-follow instructions – rugged carrying case

“Vacuum-View” Suction Line Analyzer - Part #T15W

T15W  

Analyze suction line problems (ie. air leaks, restrictions, dirt, etc.) using this clear tubing service tool. Vacuum gauge liquid dampens pulsation allowing precise measurement and protects gauge from hydraulic shock damage. Actually see what’s happening inside that problem suction line!  Complete instructions and “Service Truck Tough” carrying case.

  • Thick clear tubing does not collapse from vacuum
  • All brass with stainless steel tubing clamps
  • Fits popular 3/8” and 1/2” suction line fittings
  • Stainless steel liquid filled gauge, range 0 – 30” Hg
  • Easy-to-follow instructions – rugged carrying case